MC100EL35DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL35 |
| Function | Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | +-5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 2 |
| Clock Frequency | 2.2GHz |
| Propagation Delay | 700 ps |
| Turn On Delay Time | 525 ps |
| Logic Function | Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 32mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.745 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL35DTG Overview
The flip flop is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). The Tubepackage contains it. There is a Differentialoutput configured with it. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at a voltage of -4.2V~-5.7V. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 100EL series. Its output frequency should not exceed 2.2GHz. There is a consumption of 32mAof quiescent energy. 8terminations have occurred. It is a member of the 100EL35 family. Power is supplied from a voltage of 5V volts. The electronic part is mounted in the way of Surface Mount. There are 8pins on it. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 2. In this case, the maximum supply voltage (Vsup) reaches 5.7V. Normal operation requires a supply voltage (Vsup) above 4.2V. 1 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for RAIL. It runs on +-5Vvolts of power. There is also a characteristic of NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC100EL35DTG Features
Tube package
100EL series
8 pins
2 Bits
+-5V power supplies
MC100EL35DTG Applications
There are a lot of ON Semiconductor MC100EL35DTG Flip Flops applications.
- Supports Live Insertion
- Load Control
- Frequency Dividers
- Pattern generators
- Buffer registers
- 2 – Bit synchronous counter
- Consumer
- Shift Registers
- Safety Clamp
- Differential Individual
