MC100EP131MNG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-XQCC-N32 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 3GHz |
| Current - Quiescent (Iq) | 120mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.6 ns |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MC100EP131MNG Overview
The item is packaged in 32-VFQFN Exposed Padcases. There is an embedded version in the package Tube. This output is configured with Differential. In the configuration of the trigger, Positive, Negativeis used. This electronic part is mounted in the way of Surface Mount. With a supply voltage of -3V~-5.5V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 100EPseries of FPGAs. It should not exceed 3GHzin its output frequency. A total of 1elements are present in it. During its operation, it consumes 120mA quiescent energy. In 32terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is powered by a voltage of 3.3V . There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 3V. In addition, you can refer to the additinal NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the D latch.
MC100EP131MNG Features
Tube package
100EP series
MC100EP131MNG Applications
There are a lot of Rochester Electronics, LLC MC100EP131MNG Flip Flops applications.
- Memory
- Differential Individual
- Safety Clamp
- Bounce elimination switch
- Individual Asynchronous Resets
- Cold spare funcion
- Shift Registers
- Set-reset capability
- Reduced system switching noise
- Balanced Propagation Delays
