MC100EP451MNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Shift Registers |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP451 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 6 |
| Clock Frequency | 3GHz |
| Propagation Delay | 550 ps |
| Turn On Delay Time | 650 ps |
| Current - Quiescent (Iq) | 135mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 6 |
| Count Direction | RIGHT |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP451MNR4G Overview
The flip flop is packaged in 32-VFQFN Exposed Pad. Package Tape & Reel (TR)embeds it. This output is configured with Differential. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of -3V~-5.5V volts. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 100EPseries of FPGAs. It should not exceed 3GHzin its output frequency. There are 1 elements in it. As a result, it consumes 135mA of quiescent current without being affected by external factors. There are 32 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 100EP451 family. The power source is powered by 3.3V. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 32. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the Shift Registersbase part number family. This flip flop is designed with 6 Bits. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. A power supply of -4.5Vis required to operate it. Currently, there are 6 input lines present. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. In this case, the high level output current is set to -50mA. There is 50mA output current at the low level.
MC100EP451MNR4G Features
Tape & Reel (TR) package
100EP series
32 pins
6 Bits
-4.5V power supplies
MC100EP451MNR4G Applications
There are a lot of ON Semiconductor MC100EP451MNR4G Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Cold spare funcion
- Single Down Count-Control Line
- Latch-up performance
- QML qualified product
- Counters
- Single Up Count-Control Line
- Bus hold
- Memory
