MC100LVEL31DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 100LVEL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -3V~-3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100LVEL31 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Power Supplies | -3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Output Current | 50mA |
| Number of Bits | 1 |
| Clock Frequency | 2.9GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 475 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 35mA |
| Max Input Voltage | 2.42V |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| fmax-Min | 2900 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2900000000Hz |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100LVEL31DG Overview
The item is packaged in 8-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tubepackage. In the configuration, Differentialis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to -3V~-3.8V. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 100LVEL series. A frequency of 2.9GHzshould be the maximum output frequency. There is 35mA quiescent consumption. There are 8 terminations,You can search similar parts based on 100LVEL31. Power is supplied from a voltage of 3.3V volts. Surface Mount mounts this electronic component. There are 8pins on it. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 1bits. For normal operation, the supply voltage (Vsup) should be above 3V. Despite its superior flexibility, it relies on 1 circuits to achieve it. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. It runs on -3.3Vvolts of power. Featuring the maximum design flexibility, it has an output current of 50mA . A high level output current of 50mAis set. Low level output current is set to 50mA.
MC100LVEL31DG Features
Tube package
100LVEL series
8 pins
1 Bits
-3.3V power supplies
MC100LVEL31DG Applications
There are a lot of ON Semiconductor MC100LVEL31DG Flip Flops applications.
- Shift registers
- Single Down Count-Control Line
- Parallel data storage
- Storage registers
- Latch-up performance
- Balanced 24 mA output drivers
- Frequency Divider circuits
- Single Up Count-Control Line
- Bus hold
- Frequency division
