MC10E431FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E431 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 850 ps |
| Turn On Delay Time | 700 ps |
| Family | 10E |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 132mA |
| Max Input Voltage | 4.16V |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10E431FNR2G Overview
As a result, it is packaged as 28-LCC (J-Lead). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Differential. This trigger is configured to use Positive, Negative. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of -4.2V~-5.7V volts. 0°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 10Eseries of FPGAs. You should not exceed 1.1GHzin the output frequency of the device. As a result, it consumes 132mA of quiescent current without being affected by external factors. A total of 28terminations have been recorded. It is a member of the 10E431 family. It is powered by a voltage of 5V . An electronic device belonging to the family 10Ecan be found here. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 28. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. There is a 5.7Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 4.2V. The superior flexibility is achieved through the use of 3 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The power supply is -5.2V. Additionally, you may refer to the D latch's additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC10E431FNR2G Features
Tape & Reel (TR) package
10E series
28 pins
-5.2V power supplies
MC10E431FNR2G Applications
There are a lot of ON Semiconductor MC10E431FNR2G Flip Flops applications.
- High Performance Logic for test systems
- CMOS Process
- Latch-up performance
- Buffered Clock
- Memory
- Bounce elimination switch
- Data Synchronizers
- Count Modes
- Data transfer
- ESD protection
