MC10EL31DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL31 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Output Current | 50mA |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 645 ps |
| Turn On Delay Time | 465 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Max Input Voltage | 4.19V |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 32mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000000Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EL31DG Overview
The item is packaged in 8-SOIC (0.154, 3.90mm Width)cases. D flip flop is included in the Tubepackage. T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis required for its operation. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 10ELseries comprises this type of FPGA. A frequency of 2.8GHzshould not be exceeded by its output. As a result, it consumes 32mA of quiescent current without being affected by external factors. Terminations are 8. This D latch belongs to the family of 10EL31. It is powered from a supply voltage of 5V. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. 1bits are used in its design. Vsup reaches 5.7V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 4.2V. The superior flexibility of this product is achieved by using 1 circuits. In light of its reliable performance, this T flip flop is well suited for RAIL. There are -5.2V power supplies attached to it. The output current of 50mA makes it feature maximum design flexibility. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V on the electronic flip flop that can be referred to. A 50mAvalue is set for the high level output current. Low level output current is set to 50mA.
MC10EL31DG Features
Tube package
10EL series
8 pins
1 Bits
-5.2V power supplies
MC10EL31DG Applications
There are a lot of ON Semiconductor MC10EL31DG Flip Flops applications.
- Bus hold
- 2 – Bit synchronous counter
- Balanced 24 mA output drivers
- Communications
- Memory
- Set-reset capability
- Control circuits
- Registers
- Shift registers
- Convert a momentary switch to a toggle switch
