MC10EL31DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EL31 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 465 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 32mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EL31DTR2 Overview
The flip flop is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). D flip flop is included in the Tape & Reel (TR)package. The output it is configured with uses Differential. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of -4.2V~-5.7V is required for operation. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 10ELseries of FPGAs. Its output frequency should not exceed 2.8GHz Hz. As a result, it consumes 32mA of quiescent current without being affected by external factors. A total of 8terminations have been recorded. Members of the 10EL31family make up this object. A voltage of 5V is used to power it. There is an electronic component mounted in the way of Surface Mount. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. There are 1bits in this flip flop. There is a 5.7Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 4.2Vin order to ensure normal operation. Due to its superior flexibility, it uses 1 circuits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of -5.2V volts. NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis also one of its characteristics.
MC10EL31DTR2 Features
Tape & Reel (TR) package
10EL series
1 Bits
-5.2V power supplies
MC10EL31DTR2 Applications
There are a lot of ON Semiconductor MC10EL31DTR2 Flip Flops applications.
- Shift Registers
- Load Control
- Single Up Count-Control Line
- Common Clocks
- Frequency Divider circuits
- ATE
- ESCC
- Shift registers
- Functionally equivalent to the MC10/100EL29
- Asynchronous counter
