MC10EL52DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EL52 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 25mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EL52DTR2 Overview
As a result, it is packaged as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Differentialas the output. Positive, Negativeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. FPGAs belonging to the 10ELseries contain this type of chip. Its output frequency should not exceed 2.8GHz. It consumes 25mA of quiescent A total of 8terminations have been recorded. The object belongs to the 10EL52 family. The D flip flop is powered by a voltage of 5V . There is an electronic part mounted in the way of Surface Mount. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. This flip flop is designed with 1 Bits. In this case, the maximum supply voltage (Vsup) reaches 5.7V. Normal operation requires a supply voltage (Vsup) above 4.2V. To achieve this superior flexibility, 1 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. In order for the device to operate, it requires -5.2V power supplies. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V on the electronic flip flop that can be referred to.
MC10EL52DTR2 Features
Tape & Reel (TR) package
10EL series
1 Bits
-5.2V power supplies
MC10EL52DTR2 Applications
There are a lot of ON Semiconductor MC10EL52DTR2 Flip Flops applications.
- Matched Rise and Fall
- Computing
- Data storage
- Memory
- Functionally equivalent to the MC10/100EL29
- ESD protection
- Registers
- Single Up Count-Control Line
- Circuit Design
- Asynchronous counter
