MC10EP29MNG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 3GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 57mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.5 ns |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MC10EP29MNG Overview
It is embeded in 20-VFQFN Exposed Pad case. It is contained within the Tubepackage. T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive, Negative. It is mounted in the way of Surface Mount. A -3V~-5.5Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 10EP series. Its output frequency should not exceed 3GHz. In total, there are 2 elements. T flip flop consumes 57mA quiescent energy. A total of 20terminations have been recorded. A voltage of 3.3V provides power to the D latch. The electronic device belongs to the 10Efamily. 5.5Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 3V for normal operation. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V.
MC10EP29MNG Features
Tube package
10EP series
MC10EP29MNG Applications
There are a lot of Rochester Electronics, LLC MC10EP29MNG Flip Flops applications.
- Clock pulse
- Common Clocks
- ESD performance
- Buffer registers
- Count Modes
- Memory
- ATE
- Communications
- 2 – Bit synchronous counter
- Latch-up performance
