MC10EP451FA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | 10EP |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PQFP-G32 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 3GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 125mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 6 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 0.55 ns |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
MC10EP451FA Overview
It is packaged in the way of 32-LQFP. D flip flop is included in the Traypackage. This output is configured with Differential. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. A voltage of 3V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. FPGAs belonging to the 10EPseries contain this type of chip. Its output frequency should not exceed 3GHz. In total, there are 1 elements. It consumes 125mA of quiescent current without being affected by external factors. Terminations are 32. It is powered by a voltage of 3.3V . An electronic device belonging to the family 10Ecan be found here. In this case, the maximum supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V. Additionally, it is characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V.
MC10EP451FA Features
Tray package
10EP series
MC10EP451FA Applications
There are a lot of Rochester Electronics, LLC MC10EP451FA Flip Flops applications.
- Load Control
- Latch
- High Performance Logic for test systems
- CMOS Process
- Reduced system switching noise
- Buffer registers
- Individual Asynchronous Resets
- Registers
- Set-reset capability
- Balanced 24 mA output drivers
