MC10EP451MNG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PQCC-N32 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 3GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 125mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 6 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 0.55 ns |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MC10EP451MNG Overview
The flip flop is packaged in 32-VFQFN Exposed Pad. You can find it in the Tubepackage. The output it is configured with uses Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to -3V~-5.5V. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. The FPGA belongs to the 10EP series. There should be no greater frequency than 3GHzon its output. In total, it contains 1 elements. This process consumes 125mA quiescents. 32terminations have occurred. A voltage of 3.3V is used to power it. Devices in the 10Efamily are electronic devices. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be kept above 3V for normal operation. In addition, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vis a characteristic of it.
MC10EP451MNG Features
Tube package
10EP series
MC10EP451MNG Applications
There are a lot of Rochester Electronics, LLC MC10EP451MNG Flip Flops applications.
- Circuit Design
- High Performance Logic for test systems
- Reduced system switching noise
- Set-reset capability
- EMI reduction circuitry
- ATE
- Parallel data storage
- Latch-up performance
- Event Detectors
- Bounce elimination switch
