MC10H131FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PLCC (9x9) |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 10H |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | -4.9V~-5.46V |
| Frequency | 250MHz |
| Base Part Number | 10H131 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | -5.46V |
| Min Supply Voltage | -4.94V |
| Number of Bits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 1.7 ns |
| Turn On Delay Time | 1 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 56mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Number of Input Lines | 2 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H131FN Overview
In the form of 20-LCC (J-Lead), it has been packaged. It is included in the package Tube. It is configured with Differentialas an output. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. A supply voltage of -4.9V~-5.46V is required for operation. A temperature of 0°C~75°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 10Hseries FPGA. It should not exceed 250MHzin terms of its output frequency. In total, it contains 2 elements. As a result, it consumes 56mA quiescent current and is not affected by external forces. JK flip flop belongs to 10H131 family. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 2. The superior flexibility of this product is achieved by using 2 circuits. To operate, the chip has a total of 2 output lines. Currently, there are 2 input lines present. Ideally, the operating temperature should be below 75°C. It is recommended that the operating temperature be greater than 0°C. It operates with the minimal supply voltage of -4.94V. -5.46Vis the maximum supply voltage it supports. This frequency can be achieved 250MHz.
MC10H131FN Features
Tube package
10H series
20 pins
2 Bits
MC10H131FN Applications
There are a lot of ON Semiconductor MC10H131FN Flip Flops applications.
- Memory
- Test & Measurement
- Cold spare funcion
- Instrumentation
- Consumer
- Power down protection
- Computers
- Set-reset capability
- Data Synchronizers
- ESD performance
