MC10H135FNR2
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10H135 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.6 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 68mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 75mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | JK Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
MC10H135FNR2 Overview
The flip flop is packaged in 20-LCC (J-Lead). Package Tape & Reel (TR)embeds it. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of -4.9V~-5.46V. It is at 0°C~75°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as JK Type. It is a type of FPGA belonging to the 10H series. A frequency of 250MHzshould not be exceeded by its output. There is a consumption of 68mAof quiescent energy. Currently, there are 20 terminations. The 10H135family includes it. In this case, the D flip flop belongs to the 10Hfamily. There is an electronic component mounted in the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. Using 2 circuits, it is highly flexible. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. As of now, there are 4input lines. There is 50mA output current at the high level. It is set to 50mAfor low level output current.
MC10H135FNR2 Features
Tape & Reel (TR) package
10H series
20 pins
MC10H135FNR2 Applications
There are a lot of ON Semiconductor MC10H135FNR2 Flip Flops applications.
- Frequency division
- Single Up Count-Control Line
- ESD performance
- Set-reset capability
- Shift registers
- Buffered Clock
- Frequency Divider circuits
- Guaranteed simultaneous switching noise level
- ESCC
- Parallel data storage
