MC10H176M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 10H176 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.2 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 112mA |
| Trigger Type | Positive Edge |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 2.05mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H176M Overview
16-SOIC (0.209, 5.30mm Width)is the packaging method. D flip flop is embedded in the Tube package. There is a Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of -4.9V~-5.46V. It is at 0°C~75°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 10H series. It should not exceed 250MHzin its output frequency. The list contains 1 elements. As a result, it consumes 112mA quiescent current. It has been determined that there have been 16 terminations. You can search similar parts based on 10H176. In terms of electronic devices, this device belongs to the 10Hfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. An electronic part with 6bits has been designed. 7 circuits are used to achieve its superior flexibility. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. It has 6 output lines to operate.
MC10H176M Features
Tube package
10H series
16 pins
6 Bits
MC10H176M Applications
There are a lot of ON Semiconductor MC10H176M Flip Flops applications.
- ESD performance
- Instrumentation
- Memory
- Data storage
- Test & Measurement
- Clock pulse
- Control circuits
- Consumer
- Patented noise
- Common Clocks
