MC14013BDTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Capacitance | 7.5pF |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Power Dissipation | 500mW |
| Clock Frequency | 14MHz |
| Propagation Delay | 350 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 7 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14013BDTR2G Overview
14-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 3V~18Vvolt supply, it operates as follows. It is at -55°C~125°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. It belongs to the 4000Bseries of FPGAs. In order for it to function properly, its output frequency should not exceed 14MHz. There are 14 terminations,It is a member of the 4013 family. A voltage of 5V provides power to the D latch. There is 5pF input capacitance for this T flip flop. It is mounted in the way of Surface Mount. The 14pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. For normal operation, the supply voltage (Vsup) should be above 3V. Despite its superior flexibility, it relies on 2 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It consumes 4μA current. D flip flop is employed 1inputs.
MC14013BDTR2G Features
Tape & Reel (TR) package
4000B series
14 pins
MC14013BDTR2G Applications
There are a lot of ON Semiconductor MC14013BDTR2G Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Counters
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- ESCC
- Guaranteed simultaneous switching noise level
- Patented noise
- Single Up Count-Control Line
- Latch-up performance
- Circuit Design
