MC14076BDG
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4076 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 12MHz |
| Propagation Delay | 600 ns |
| Turn On Delay Time | 600 ns |
| Current - Quiescent (Iq) | 20μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 4 |
| Number of Output Lines | 3 |
| fmax-Min | 6 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
MC14076BDG Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. The package Tubecontains it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 3V~18V. A temperature of -55°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 4000Bseries of FPGAs. In order for it to function properly, its output frequency should not exceed 12MHz. The list contains 1 elements. It consumes 20μA of quiescent current without being affected by external factors. 16terminations have occurred. If you search by 4076, you will find similar parts. It is powered by a voltage of 5V . A 5pFfarad input capacitance is provided by this T flip flop. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. It is designed with 4bits. A normal operating voltage (Vsup) should remain above 3V. This D flip flop is well suited for RAIL based on its reliable performance. The JK flip flop is with 3 output lines to operate. 4input lines are available for you to choose from.
MC14076BDG Features
Tube package
4000B series
16 pins
4 Bits
MC14076BDG Applications
There are a lot of ON Semiconductor MC14076BDG Flip Flops applications.
- Instrumentation
- Storage registers
- Count Modes
- Modulo – n – counter
- Set-reset capability
- Frequency division
- Shift Registers
- Convert a momentary switch to a toggle switch
- 2 – Bit synchronous counter
- Bus hold
