MC14175BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4175 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 14MHz |
| Propagation Delay | 500 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14175BDR2G Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. T flip flop uses Differentialas the output. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. A voltage of 3V~18Vis used as the supply voltage. -55°C~125°C TAis the operating temperature. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 4000B series. Its output frequency should not exceed 14MHz Hz. In total, there are 1 elements. Terminations are 16. You can search similar parts based on 4175. It is powered by a voltage of 5V . Its input capacitance is 5pFfarads. In this case, the electronic component is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 4. The supply voltage (Vsup) should be maintained above 3V for normal operation. To achieve this superior flexibility, 4 circuits are used. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There is 20μA quiescent current consumption by it.
MC14175BDR2G Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
MC14175BDR2G Applications
There are a lot of ON Semiconductor MC14175BDR2G Flip Flops applications.
- Storage registers
- ESD protection
- Divide a clock signal by 2 or 4
- ATE
- Individual Asynchronous Resets
- Shift registers
- Circuit Design
- Memory
- ESCC
- Single Up Count-Control Line
