MC33060AP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | MC33060A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Input Voltage (Min) | 7V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 25kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 200kHz |
| Max Duty Cycle | 96 % |
| Height Seated (Max) | 4.69mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC33060AP Overview
It comes in a 14-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 7V~40V voltage are supplied and operated. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 25kHz. Surface Mount makes it suitable for general dc dc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 14 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. MC33060A can be searched for other relevant dc to dc converter ics. Pins number 14 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 7V. Based on the test statistics, DC regulator outputs voltage 30V. The dc to dc regulator can only accept a maximum input voltage of 40V. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 96 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Through Hole makes it suitable. The max frequency of the pmic can reach 200kHz. When running the voltage regulator dc to dc in a circuit, users should apply 15V to ensure safety and reliability.
MC33060AP Features
Transistor Driver Outputs
Switching Frequency: 25kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
MC33060AP Applications
There are a lot of ON Semiconductor MC33060AP DC to DC converter applications.
- Gear/thread machining machines
- Ball screw pair
- Magnetohydrodynamic power
- Grinders
- Scientific research
- Energy management systems
- Overvoltage protection circuits in TV sets
- Low output voltage switching power supply circuits
- Radio equipment
- Medical equipment
