MC74AC273NG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 175MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MC74AC273NG Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. The output it is configured with uses Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis occupied by this electronic component. A voltage of 2V~6Vis required for its operation. It is operating at -40°C~85°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74AC series. Its output frequency should not exceed 175MHz Hz. A total of 1 elements are present. This process consumes 8μA quiescents. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 4.5pF farads. Electronic devices of this type belong to the ACfamily. There is a 6Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.
MC74AC273NG Features
Tube package
74AC series
MC74AC273NG Applications
There are a lot of Rochester Electronics, LLC MC74AC273NG Flip Flops applications.
- Digital electronics systems
- Modulo – n – counter
- Registers
- Single Down Count-Control Line
- CMOS Process
- Computing
- Storage Registers
- Storage registers
- Frequency Divider circuits
- Single Up Count-Control Line
