MC74AC374MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74AC374MELG Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~6Vis required for its operation. Temperature is set to -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74AC series. You should not exceed 155MHzin its output frequency. In total, there are 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74AC374 family. It is powered by a voltage of 5V . Input capacitance of this device is 4.5pF farads. In this case, the D flip flop belongs to the ACfamily. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. There are 8bits in its design. In this case, the maximum supply voltage (Vsup) reaches 6V. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 5V. There are 3 output lines on it.
MC74AC374MELG Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC374MELG Applications
There are a lot of ON Semiconductor MC74AC374MELG Flip Flops applications.
- Automotive
- Single Up Count-Control Line
- Matched Rise and Fall
- Cold spare funcion
- Data storage
- Consumer
- Pattern generators
- Power down protection
- Digital electronics systems
- Buffered Clock
