MC74AC374MG
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
MC74AC374MG Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). The package Tubecontains it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. There should be no greater frequency than 155MHzon its output. A total of 1 elements are present. As a result, it consumes 8μA of quiescent current without being affected by external factors. The number of terminations is 20. You can search similar parts based on 74AC374. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 4.5pF farads. ACis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. There are 8bits in its design. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It operates with 3 output lines.
MC74AC374MG Features
Tube package
74AC series
20 pins
8 Bits
MC74AC374MG Applications
There are a lot of ON Semiconductor MC74AC374MG Flip Flops applications.
- Load Control
- Storage registers
- Computers
- Functionally equivalent to the MC10/100EL29
- Individual Asynchronous Resets
- Storage Registers
- Consumer
- Computing
- ATE
- QML qualified product
