MC74AC377DWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 50mA |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC377DWG Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. As part of the package Tube, it is embedded. Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74AC series. In order for it to function properly, its output frequency should not exceed 140MHz. D latch consists of 1 elements. As a result, it consumes 8μA quiescent current. A total of 20terminations have been recorded. Members of the 74AC377family make up this object. An input voltage of 5Vpowers the D latch. The input capacitance of this JK flip flopis 4.5pF farads. An electronic device belonging to the family ACcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 8. 6Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. In order to achieve its superior flexibility, 8 circuits are used. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The 50mA output current allows it to be designed with the greatest amount of flexibility.
MC74AC377DWG Features
Tube package
74AC series
20 pins
8 Bits
MC74AC377DWG Applications
There are a lot of ON Semiconductor MC74AC377DWG Flip Flops applications.
- Bus hold
- Registers
- Buffer registers
- Test & Measurement
- Event Detectors
- CMOS Process
- Functionally equivalent to the MC10/100EL29
- Asynchronous counter
- Counters
- Single Down Count-Control Line
