MC74AC377N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 140MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MC74AC377N Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. Currently, the output is configured to use Non-Inverted. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Through Hole. Powered by a 2V~6Vvolt supply, it operates as follows. -40°C~85°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. In order for it to function properly, its output frequency should not exceed 140MHz. D latch consists of 1 elements. There is a consumption of 8μAof quiescent energy. It has been determined that there have been 20 terminations. A voltage of 5V is used as the power supply for this D latch. There is 4.5pF input capacitance for this T flip flop. The electronic device belongs to the ACfamily. Vsup reaches its maximum value at 6V. Normal operation requires a supply voltage (Vsup) above 2V.
MC74AC377N Features
Tube package
74AC series
MC74AC377N Applications
There are a lot of Rochester Electronics, LLC MC74AC377N Flip Flops applications.
- Memory
- Latch-up performance
- Clock pulse
- Buffered Clock
- Parallel data storage
- Bus hold
- Computing
- Asynchronous counter
- Digital electronics systems
- Patented noise
