MC74AC377NG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 140MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MC74AC377NG Overview
The package is in the form of 20-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. T flip flop uses Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A voltage of 2V~6Vis required for its operation. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. JK flip flop belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 140MHz Hz. In total, it contains 1 elements. It consumes 8μA of quiescent current without being affected by external factors. The number of terminations is 20. The power source is powered by 5V. JK flip flop input capacitance is 4.5pF farads. Electronic devices of this type belong to the ACfamily. As soon as 6Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be above 2V.
MC74AC377NG Features
Tube package
74AC series
MC74AC377NG Applications
There are a lot of Rochester Electronics, LLC MC74AC377NG Flip Flops applications.
- ESD performance
- Safety Clamp
- Latch-up performance
- Automotive
- Supports Live Insertion
- Pattern generators
- Bus hold
- Dynamic threshold performance
- Power down protection
- Registers
