MC74AC574DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC574DTR2G Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. The Tape & Reel (TR)package contains it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74AC series. A frequency of 95MHzshould not be exceeded by its output. A total of 1 elements are present. A total of 20 terminations have been made. This D latch belongs to the family of 74AC574. A voltage of 5V is used to power it. There is 4.5pF input capacitance for this T flip flop. In terms of electronic devices, this device belongs to the ACfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. It reaches the maximum supply voltage (Vsup) at 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its superior flexibility is attributed to its use of 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The flip flop has 2embedded ports. Optimal efficiency requires a supply voltage of 5V. The JK flip flop is with 3 output lines to operate. As a result, it consumes 8μA of quiescent current without being affected by external factors.
MC74AC574DTR2G Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC574DTR2G Applications
There are a lot of ON Semiconductor MC74AC574DTR2G Flip Flops applications.
- Supports Live Insertion
- Balanced Propagation Delays
- Latch-up performance
- Frequency Dividers
- Dynamic threshold performance
- Shift Registers
- Frequency Divider circuits
- Memory
- Guaranteed simultaneous switching noise level
- Matched Rise and Fall
