MC74AC574DWR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 95MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
MC74AC574DWR2 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. It is operating at a temperature of -40°C~85°C TA. This electronic flip flop is of type D-Type. The 74ACseries comprises this type of FPGA. A frequency of 95MHzshould be the maximum output frequency. In total, it contains 1 elements. This process consumes 8μA quiescents. A total of 20 terminations have been made. A voltage of 5V provides power to the D latch. A JK flip flop with a 4.5pFfarad input capacitance is used here. ACis the family of this D flip flop. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. A total of 2ports are embedded in the D flip flop.
MC74AC574DWR2 Features
Tape & Reel (TR) package
74AC series
MC74AC574DWR2 Applications
There are a lot of Rochester Electronics, LLC MC74AC574DWR2 Flip Flops applications.
- Single Down Count-Control Line
- Synchronous counter
- Shift registers
- Count Modes
- Test & Measurement
- Convert a momentary switch to a toggle switch
- Storage Registers
- Guaranteed simultaneous switching noise level
- Control circuits
- Bus hold
