MC74AC74MELG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 160MHz |
| Family | AC |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| RoHS Status | ROHS3 Compliant |
MC74AC74MELG Overview
It is embeded in 14-SOIC (0.209, 5.30mm Width) case. It is contained within the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74ACseries of FPGAs. It should not exceed 160MHzin its output frequency. D latch consists of 2 elements. There is 4μA quiescent consumption. There have been 14 terminations. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AC. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V.
MC74AC74MELG Features
Tape & Reel (TR) package
74AC series
MC74AC74MELG Applications
There are a lot of Rochester Electronics, LLC MC74AC74MELG Flip Flops applications.
- Circuit Design
- Control circuits
- Data transfer
- Power down protection
- Synchronous counter
- High Performance Logic for test systems
- Reduced system switching noise
- Event Detectors
- Counters
- Shift Registers
