MC74ACT273DWG
| Parameters | |
|---|---|
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.3876mm |
| Length | 12.9286mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 12 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 24μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
MC74ACT273DWG Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is included in the package Tube. T flip flop uses Non-Invertedas the output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. The 74ACTseries comprises this type of FPGA. There should be no greater frequency than 200MHzon its output. A total of 1elements are present in it. Despite external influences, it consumes 8μAof quiescent current. 20terminations have occurred. The 74ACT273 family contains it. An input voltage of 5Vpowers the D latch. Its input capacitance is 4.5pF farads. A device of this type belongs to the family of ACT. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 8bits are used in this part. Despite its superior flexibility, it relies on 8 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for RAIL. An electrical current of 5V volts is applied to it. High efficiency requires the supply voltage to be maintained at 5V. The output current of 24mA makes it feature maximum design flexibility.
MC74ACT273DWG Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT273DWG Applications
There are a lot of ON Semiconductor MC74ACT273DWG Flip Flops applications.
- Data storage
- Digital electronics systems
- Consumer
- ESCC
- Supports Live Insertion
- Frequency division
- Computing
- Cold spare funcion
- Single Up Count-Control Line
- Parallel data storage
