MC74ACT373N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT373 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 7 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT373N Overview
The 20-DIP (0.300, 7.62mm) package contains it. It is packaged in the way of Tube. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. With a supply voltage of 4.5V~5.5V, it operates. The operating temperature is -40°C~85°C TA. It is a type of FPGA belonging to the 74ACT series. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. It belongs to 74ACT373 family. The device works with a voltage of 5V for its supply voltage. 8 pins are included. ACT is the family name of this electronic device. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Through Hole. In this device, there are 2 ports. Subcategory FF/Latches contains this part. The system is powered by 5V sources. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 3 output lines that correspond to the binary equivalents of the input line. 8 circuits enable it to achieve high performance.
MC74ACT373N Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT373 family
8 pin count
20 pins
5V power supplies
MC74ACT373N Applications
There are a lot of ON Semiconductor MC74ACT373N Latches applications.
- Lamp and Display (LED)
- Shift left register
- Counting
- Avionics
- Stacked or Push-Down Registers
- Counter timers
- Parallel data storage
- Double bus register system
- Frequency dividing
- Automotive Body Electronics
