MC74ACT74MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 5.5 ns |
| Family | ACT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT74MELG Overview
It is packaged in the way of 14-SOIC (0.209, 5.30mm Width). The Tape & Reel (TR)package contains it. This output is configured with Differential. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74ACT series. You should not exceed 210MHzin its output frequency. This process consumes 4μA quiescents. Currently, there are 14 terminations. Members of the 74ACT74family make up this object. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 4.5pF farads. It is a member of the ACTfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. Its flexibility is enhanced by 2 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be kept at 5V. There are 1 output lines on it.
MC74ACT74MELG Features
Tape & Reel (TR) package
74ACT series
14 pins
5V power supplies
MC74ACT74MELG Applications
There are a lot of ON Semiconductor MC74ACT74MELG Flip Flops applications.
- Reduced system switching noise
- Control circuits
- Frequency Divider circuits
- Memory
- Synchronous counter
- Instrumentation
- Parallel data storage
- ESD protection
- Data Synchronizers
- Frequency division
