MC74ACT74NG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 210MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.69mm |
| RoHS Status | ROHS3 Compliant |
MC74ACT74NG Overview
It is embeded in 14-DIP (0.300, 7.62mm) case. The Tubepackage contains it. There is a Differentialoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74ACT series. It should not exceed 210MHzin terms of its output frequency. There are 2 elements in it. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 14terminations have been recorded. It is powered from a supply voltage of 5V. There is 4.5pF input capacitance for this T flip flop. In terms of electronic devices, this device belongs to the ACTfamily of devices. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 4.5V for normal operation.
MC74ACT74NG Features
Tube package
74ACT series
MC74ACT74NG Applications
There are a lot of Rochester Electronics, LLC MC74ACT74NG Flip Flops applications.
- Balanced Propagation Delays
- Matched Rise and Fall
- Computing
- Counters
- Latch-up performance
- ESCC
- QML qualified product
- Bus hold
- Parallel data storage
- Load Control
