MC74HC112ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC112 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Propagation Delay | 235 ns |
| Turn On Delay Time | 26 ns |
| Family | HC/UH |
| Logic Function | AND, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| fmax-Min | 35 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC112ADG Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. Differentialis the output configured for it. Negative Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. Currently, the operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as JK Type. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 35MHzin its output frequency. During its operation, it consumes 4μA quiescent energy. 16terminations have occurred. The 74HC112 family contains it. A voltage of 4.5V is used as the power supply for this D latch. This JK flip flop has a 10pFfarad input capacitance. An electronic device belonging to the family HC/UHcan be found here. It is mounted in the way of Surface Mount. It is designed with 16 pins. In this device, the clock edge trigger type is Negative Edge. This RS flip flops is a part number FF/Latches. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. There are 2 channels available.
MC74HC112ADG Features
Tube package
74HC series
16 pins
MC74HC112ADG Applications
There are a lot of ON Semiconductor MC74HC112ADG Flip Flops applications.
- Asynchronous counter
- Control circuits
- Reduced system switching noise
- Storage registers
- Supports Live Insertion
- Storage Registers
- Balanced Propagation Delays
- Consumer
- Automotive
- EMI reduction circuitry
