MC74HC174ADTR2
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC174 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 35MHz |
| Propagation Delay | 110 ns |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 6 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Width | 4.4mm |
MC74HC174ADTR2 Overview
It is embeded in 16-TSSOP (0.173, 4.40mm Width) case. You can find it in the Tape & Reel (TR)package. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 35MHzin its output frequency. A total of 1 elements are present. It consumes 4μA of quiescent Currently, there are 16 terminations. The object belongs to the 74HC174 family. A voltage of 4.5V provides power to the D latch. JK flip flop input capacitance is 10pF farads. The electronic device belongs to the HC/UHfamily. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. In this device, the clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 6bits are used in this part. 6Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 7 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. In order for the chip to function, it has 6output lines.
MC74HC174ADTR2 Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
MC74HC174ADTR2 Applications
There are a lot of ON Semiconductor MC74HC174ADTR2 Flip Flops applications.
- Clock pulse
- Shift registers
- ESD protection
- ATE
- QML qualified product
- Supports Live Insertion
- Balanced 24 mA output drivers
- Divide a clock signal by 2 or 4
- Individual Asynchronous Resets
- 2 – Bit synchronous counter
