MC74HC273ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC273 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 145 ns |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC273ADTR2 Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74HC series. It should not exceed 35MHzin terms of its output frequency. The list contains 1 elements. It consumes 4μA of quiescent There are 20 terminations,JK flip flop belongs to 74HC273 family. The power supply voltage is 3V. Its input capacitance is 10pF farads. It belongs to the family of electronic devices known as HC/UH. Electronic part Surface Mountis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with a number of bits of 8. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D latch operates on 2/6V volts.
MC74HC273ADTR2 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC273ADTR2 Applications
There are a lot of ON Semiconductor MC74HC273ADTR2 Flip Flops applications.
- Single Up Count-Control Line
- Counters
- Parallel data storage
- Circuit Design
- High Performance Logic for test systems
- Balanced Propagation Delays
- Power down protection
- Computing
- Bounce elimination switch
- Memory
