MC74HC273ADWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC273 |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 220 ns |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 8 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC273ADWR2G Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. You can find it in the Tape & Reel (TR)package. In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Temperature is set to -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74HCseries of FPGAs. A frequency of 35MHzshould not be exceeded by its output. There are 1 elements in it. There is 4μA quiescent consumption. 20terminations have occurred. The 74HC273 family contains it. It is powered from a supply voltage of 3V. This JK flip flop has a 10pFfarad input capacitance. Electronic devices of this type belong to the HC/UHfamily. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 8bits is used in this application. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch runs on a voltage of 2/6V volts. It operates with 8 output lines. It is reported that there are 8 channels.
MC74HC273ADWR2G Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC273ADWR2G Applications
There are a lot of ON Semiconductor MC74HC273ADWR2G Flip Flops applications.
- Supports Live Insertion
- Instrumentation
- Test & Measurement
- Counters
- Reduced system switching noise
- Clock pulse
- 2 – Bit synchronous counter
- Dynamic threshold performance
- Circuit Design
- Convert a momentary switch to a toggle switch
