MC74HC273AF
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 220 ns |
| fmax-Min | 24 MHz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | ROHS3 Compliant |
MC74HC273AF Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). It is included in the package Tube. There is a Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. A temperature of -55°C~125°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. A frequency of 35MHzshould not be exceeded by its output. The element count is 1 . There is 4μA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 3V. There is 10pF input capacitance for this T flip flop. It is a member of the HC/UHfamily of D flip flop. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.
MC74HC273AF Features
Tube package
74HC series
MC74HC273AF Applications
There are a lot of Rochester Electronics, LLC MC74HC273AF Flip Flops applications.
- Dynamic threshold performance
- EMI reduction circuitry
- Buffered Clock
- Latch
- Frequency Dividers
- Bounce elimination switch
- Data transfer
- Latch-up performance
- Supports Live Insertion
- Automotive
