MC74HC273AFG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Supplier Device Package | SOEIAJ-20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
MC74HC273AFG Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. A package named Tubeincludes it. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 2V~6Vvolt supply, it operates as follows. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. The FPGA belongs to the 74HC series. You should not exceed 35MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. This JK flip flop has a 10pFfarad input capacitance.
MC74HC273AFG Features
Tube package
74HC series
MC74HC273AFG Applications
There are a lot of Rochester Electronics, LLC MC74HC273AFG Flip Flops applications.
- Digital electronics systems
- Frequency Divider circuits
- Registers
- EMI reduction circuitry
- CMOS Process
- Shift Registers
- Safety Clamp
- Consumer
- Balanced 24 mA output drivers
- Memory
