MC74HC374ADTR2
| Parameters | |
|---|---|
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 125 ns |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
MC74HC374ADTR2 Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74HC series. It should not exceed 35MHzin terms of its output frequency. The element count is 1 . During its operation, it consumes 4μA quiescent energy. The number of terminations is 20. Members of the 74HC374family make up this object. It is powered by a voltage of 3V . The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the HC/UHfamily. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in FF/Latches. There are 8bits in this flip flop. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. In order to achieve its superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. A total of 2/6V power supplies are needed to run it. There are 2 ports embedded in the flip flops. To operate, the chip has a total of 3 output lines.
MC74HC374ADTR2 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC374ADTR2 Applications
There are a lot of ON Semiconductor MC74HC374ADTR2 Flip Flops applications.
- Instrumentation
- Storage registers
- Circuit Design
- Computing
- Matched Rise and Fall
- Convert a momentary switch to a toggle switch
- Balanced 24 mA output drivers
- Data transfer
- Computers
- Functionally equivalent to the MC10/100EL29
