MC74HC574ADTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 27 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC574ADTR2 Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. As configured, the output uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. In this case, the operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74HC series. A frequency of 35MHzshould be the maximum output frequency. The element count is 1 . Despite external influences, it consumes 4μAof quiescent current. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74HC574family includes it. A voltage of 3V provides power to the D latch. There is 10pF input capacitance for this T flip flop. Devices in the HC/UHfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. To achieve this superior flexibility, 8 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The system runs on a power supply of 2/6V watts. This D flip flop is equipped with 0 ports. There are no output lines on the JK flip flop.
MC74HC574ADTR2 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC574ADTR2 Applications
There are a lot of ON Semiconductor MC74HC574ADTR2 Flip Flops applications.
- Automotive
- Differential Individual
- CMOS Process
- Computers
- Data storage
- Clock pulse
- Synchronous counter
- Safety Clamp
- Parallel data storage
- Frequency Dividers
