MC74HC574ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 160 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 27 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC574ADTR2G Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~6Vis required for its operation. In this case, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. It belongs to the 74HCseries of FPGAs. A frequency of 35MHzshould be the maximum output frequency. D latch consists of 1 elements. A total of 20terminations have been recorded. If you search by 74HC574, you will find similar parts. It is powered by a voltage of 3V . Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A power supply of 2/6Vis required to operate it. The flip flop contains 2ports. There are 3 output lines on it. Despite external influences, it consumes 4μAof quiescent current.
MC74HC574ADTR2G Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC574ADTR2G Applications
There are a lot of ON Semiconductor MC74HC574ADTR2G Flip Flops applications.
- Single Up Count-Control Line
- Pattern generators
- Reduced system switching noise
- Bounce elimination switch
- Power down protection
- Instrumentation
- Registers
- Communications
- Counters
- Frequency division
