MC74HC574AF
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 240 ns |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | ROHS3 Compliant |
MC74HC574AF Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). It is contained within the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. It is operating at -55°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74HCseries of FPGAs. You should not exceed 35MHzin the output frequency of the device. There are 1 elements in it. This process consumes 4μA quiescents. It has been determined that there have been 20 terminations. The power source is powered by 3V. There is 10pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HC/UH. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
MC74HC574AF Features
Tube package
74HC series
MC74HC574AF Applications
There are a lot of Rochester Electronics, LLC MC74HC574AF Flip Flops applications.
- Divide a clock signal by 2 or 4
- Storage Registers
- Data storage
- Matched Rise and Fall
- Single Down Count-Control Line
- Buffer registers
- Single Up Count-Control Line
- Functionally equivalent to the MC10/100EL29
- Automotive
- Computers
