MC74HCT273AN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 30MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 35 ns |
| fmax-Min | 20 MHz |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MC74HCT273AN Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. The FPGA belongs to the 74HCT series. It should not exceed 30MHzin its output frequency. In total, there are 1 elements. Despite external influences, it consumes 4μAof quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Power is provided by a 5V supply. Electronic devices of this type belong to the HCTfamily. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
MC74HCT273AN Features
Tube package
74HCT series
MC74HCT273AN Applications
There are a lot of Rochester Electronics, LLC MC74HCT273AN Flip Flops applications.
- Shift Registers
- Supports Live Insertion
- Automotive
- Circuit Design
- Count Modes
- Buffered Clock
- Bounce elimination switch
- CMOS Process
- Data Synchronizers
- QML qualified product
