MC74HCT273ANG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT273 |
| Function | Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HCT273ANG Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). Package Tubeembeds it. Non-Invertedis the output configured for it. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74HCT series. Its output frequency should not exceed 30MHz. A total of 1elements are contained within it. T flip flop consumes 4μA quiescent energy. There are 20 terminations,The 74HCT273family includes it. A voltage of 5V provides power to the D latch. HCTis the family of this D flip flop. It is mounted by the way of Through Hole. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. 8bits are used in its design. Due to its superior flexibility, it uses 8 circuits. Due to its reliability, this T flip flop is well suited for RAIL. It runs on 5Vvolts of power. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It offers maximum design flexibility with its output current of 4mA. The JK flip flop is with 8 output lines to operate.
MC74HCT273ANG Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT273ANG Applications
There are a lot of ON Semiconductor MC74HCT273ANG Flip Flops applications.
- QML qualified product
- Latch
- Digital electronics systems
- Memory
- Balanced Propagation Delays
- Communications
- Asynchronous counter
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- Data Synchronizers
