MC74HCT74ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 4μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 1.4W |
| Output Current | 4mA |
| Clock Frequency | 30MHz |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 24 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Collector Emitter Breakdown Voltage | -25V |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.4986mm |
| Length | 8.7376mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HCT74ADG Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). The Tubepackage contains it. T flip flop is configured with an output of Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountmounts this electrical part. The JK flip flop operates at 4.5V~5.5Vvolts. It is at -55°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 30MHzin terms of its output frequency. T flip flop consumes 2μA quiescent energy. There are 14 terminations,The 74HCT74 family contains it. The power supply voltage is 5V. The input capacitance of this JK flip flopis 10pF farads. This D flip flop belongs to the family of HCT. The electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. Considering its reliability, this T flip flop is well suited for RAIL. The D latch runs on a voltage of 5V volts. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. The 4mA output current allows it to be designed with the greatest amount of flexibility. In order to operate, the chip has 1 output lines. There are 2 channels available.
MC74HCT74ADG Features
Tube package
74HCT series
14 pins
5V power supplies
MC74HCT74ADG Applications
There are a lot of ON Semiconductor MC74HCT74ADG Flip Flops applications.
- Buffer registers
- Guaranteed simultaneous switching noise level
- Storage registers
- Event Detectors
- Data storage
- ESCC
- EMI reduction circuitry
- CMOS Process
- Set-reset capability
- Bus hold
