MC74LCX574DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LCX |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LCX574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LCX574DWR2 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. It belongs to the 74LCXseries of FPGAs. It should not exceed 150MHzin its output frequency. There are 1 elements in it. This process consumes 10μA quiescents. It has been determined that there have been 20 terminations. The 74LCX574family includes it. The power source is powered by 3.3V. Its input capacitance is 7pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 8bits. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The flip flop contains 2ports. High efficiency requires the supply voltage to be maintained at 3.3V. There are no output lines on the JK flip flop.
MC74LCX574DWR2 Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX574DWR2 Applications
There are a lot of ON Semiconductor MC74LCX574DWR2 Flip Flops applications.
- Computing
- Dynamic threshold performance
- Frequency Divider circuits
- Shift Registers
- Test & Measurement
- Communications
- Guaranteed simultaneous switching noise level
- Balanced Propagation Delays
- Differential Individual
- Instrumentation
