MC74LCX74DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | 74LCX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LCX74DG Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. D flip flop is included in the Tubepackage. As configured, the output uses Differential. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74LCXseries of FPGAs. You should not exceed 150MHzin its output frequency. During its operation, it consumes 10μA quiescent energy. There are 14 terminations,The object belongs to the 74LCX74 family. An input voltage of 2.5Vpowers the D latch. The input capacitance of this JK flip flopis 7pF farads. The electronic device belongs to the LVC/LCX/Zfamily. This electronic part is mounted in the way of Surface Mount. A total of 14pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 3.6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. There are 3.3V power supplies attached to it. With an output current of 24mA, this device offers maximum design flexibility. It has 1 output lines to operate. There are 2 channels available.
MC74LCX74DG Features
Tube package
74LCX series
14 pins
3.3V power supplies
MC74LCX74DG Applications
There are a lot of ON Semiconductor MC74LCX74DG Flip Flops applications.
- Data storage
- Frequency Dividers
- ESCC
- ATE
- Test & Measurement
- High Performance Logic for test systems
- Single Down Count-Control Line
- Circuit Design
- Memory
- Data transfer
