MC74LVX574DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 8.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 16.7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX574DTG Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~3.6Vis used as the supply voltage. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74LVXseries contain this type of chip. You should not exceed 75MHzin the output frequency of the device. D latch consists of 1 elements. This process consumes 4μA quiescents. A total of 20 terminations have been made. If you search by 74LVX574, you will find similar parts. The D flip flop is powered by a voltage of 2.7V . There is 4pF input capacitance for this T flip flop. The electronic device belongs to the LV/LV-A/LVX/Hfamily. It is mounted in the way of Surface Mount. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. It is designed with 8bits. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. As a result of its reliable performance, this T flip flop is suitable for RAIL. A D flip flop with 2embedded ports is available. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The number of channels is growing strong/weak: 8.
MC74LVX574DTG Features
Tube package
74LVX series
20 pins
8 Bits
MC74LVX574DTG Applications
There are a lot of ON Semiconductor MC74LVX574DTG Flip Flops applications.
- Data storage
- ESCC
- Memory
- CMOS Process
- 2 – Bit synchronous counter
- Storage Registers
- Frequency Divider circuits
- Storage registers
- Differential Individual
- Shift Registers
