MC74LVX574DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 8.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 16.7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVX574DTR2G Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~3.6V. -40°C~85°C TAis the operating temperature. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74LVX series. It should not exceed 75MHzin terms of its output frequency. In total, it contains 1 elements. It consumes 4μA of quiescent There are 20 terminations,You can search similar parts based on 74LVX574. A voltage of 2.7V is used as the power supply for this D latch. This T flip flop has a capacitance of 4pF farads at the input. The electronic device belongs to the LV/LV-A/LVX/Hfamily. There is an electronic component mounted in the way of Surface Mount. This board has 20 pins. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. This flip flop is designed with 8 Bits. Normally, the supply voltage (Vsup) should be kept above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. This D flip flop is equipped with 0 ports. There are 3 output lines on it.
MC74LVX574DTR2G Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
MC74LVX574DTR2G Applications
There are a lot of ON Semiconductor MC74LVX574DTR2G Flip Flops applications.
- Event Detectors
- Data transfer
- Control circuits
- Synchronous counter
- Automotive
- High Performance Logic for test systems
- Memory
- ESD performance
- Digital electronics systems
- Patented noise
