MC74LVX74DR2
| Parameters | |
|---|---|
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LVX |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.7V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVX74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 85MHz |
| Propagation Delay | 18.5 ns |
| Turn On Delay Time | 5.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 13.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
MC74LVX74DR2 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. A 2V~3.6Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74LVX series. A frequency of 85MHzshould be the maximum output frequency. There is a consumption of 2μAof quiescent energy. It has been determined that there have been 14 terminations. The object belongs to the 74LVX74 family. The power supply voltage is 2.7V. JK flip flop input capacitance is 4pF farads. The electronic device belongs to the LV/LV-A/LVX/Hfamily. There is an electronic part mounted in the way of Surface Mount. 14pins are included in its design. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. 3.6Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 2 circuits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D latch operates on 3.3V volts. There are 1 output lines in this JK flip flop.
MC74LVX74DR2 Features
Tape & Reel (TR) package
74LVX series
14 pins
3.3V power supplies
MC74LVX74DR2 Applications
There are a lot of ON Semiconductor MC74LVX74DR2 Flip Flops applications.
- Modulo – n – counter
- Instrumentation
- Automotive
- Communications
- Bus hold
- Memory
- ATE
- Guaranteed simultaneous switching noise level
- Count Modes
- Counters
