MC74VHC374DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 5.4 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC374DWR2 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The package Tape & Reel (TR)contains it. T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74VHCseries contain this type of chip. You should not exceed 120MHzin the output frequency of the device. In total, it contains 1 elements. This process consumes 4μA quiescents. A total of 20 terminations have been made. The object belongs to the 74VHC374 family. The power source is powered by 3.3V. The input capacitance of this JK flip flopis 4pF farads. It is a member of the AHC/VHCfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 8bits are used in this part. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be above 2V. Its superior flexibility is attributed to its use of 8 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. An electrical current of 2/5.5V volts is applied to it. A total of 2ports are embedded in the D flip flop. It has 3 output lines to operate.
MC74VHC374DWR2 Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
MC74VHC374DWR2 Applications
There are a lot of ON Semiconductor MC74VHC374DWR2 Flip Flops applications.
- Communications
- Computers
- Functionally equivalent to the MC10/100EL29
- Shift registers
- Test & Measurement
- Balanced 24 mA output drivers
- Synchronous counter
- Data Synchronizers
- Automotive
- Data storage
